magped SPORT2

(17 customer reviews)

A Pair of magped SPORT2 pedals

SKU: N/A Category:

magped SPORT2 pedals


  • A Pair of magped SPORT2 pedals (L+R)
  • Magnets
  • Metalic plates for SPD shoes
  • Magnetic screws in 2 lengths
  • Allen key

Weight per pair:

  • SPORT 100: 420g
  • SPORT 150: 440g
  • SPORT 200: 458g

We recommend SPD shoes with a fine to a medium coarse tread.

magnet size recommendation:

  • 100N for biker <65 kg
  • 150N for biker 65-90 kg
  • 200N for biker >75 kg and ENDURO

Dimensions: length=104mm width=92mm height=18mm

Important notice for the use of bike pedal reflectors:

The use of bike pedal reflectors is legally regulated in most countries but there are no standardized regulations throughout the EU. Specifically the use of pedal reflectors is mandatory frequently on many public roads.  We offer a reflector upgrade kit with our pedals and recommend the use of these reflectors. Please check the regulations in your country and use die pedals only in accordance with local regulations and laws.

17 reviews for magped SPORT2

  1. Dave B. (verified owner)

    Great Pedals and Fast shipping.

  2. Clyde (verified owner)

  3. Donald Savary (verified owner)

    I just tried them briefly, so I’m not entirely sure. They seem perfect, I am a perfect candidate for these – never got comfortable with clips. You should mention recumbents! Admittedly a small percentage of the market

  4. Dan Cagle (verified owner)

    I like the magnet side of the pedal but the flat side does not provide grip. I wish I had bought the pedal with magnets on both sides.

    • Rick Hopp (store manager)

      Dan, if you would like to exchange your purchase for a pair of Enduros we can do so so long as the pedals are banged up yet. Let me know and I can give you enough of a discount to pay for shipping back of your pedals. Once I receive the pedals I will ship the enduros back to you. If your interested let me know.

  5. Richard B. (verified owner)

    Quality of the pedals were good but the magnet didn’t hold my feet from slipping off the pedals. I tried with spacer and without spacer, didn’t matter feet kept slipping forward off the pedals.

    • Rick Hopp (store manager)

      This should not happen and the common issues is the type of shoe you are using. Please have a look at the recommended shoe list on the magped website.

  6. Marcus C. (verified owner)

    Easy to install and work great – just get the right shoes

  7. Paul R. (verified owner)

    Very pleased with the product, got these for my wife and she found them very easy to use

  8. Manuel Aguilar (verified owner)

    So far so good they do click alil bothersome see if it goes away

    • Rick Hopp (store manager)

      Hi Manuel, the clicking noise likely means that you haven’t adjusted the magnet height properly. It is either too high which cause compression of the damper and loosening of the hardware on the downward powerstroke. This will eventually lead to a failure of the head nut due to excessive and unnecessary wear. The magnet could also be too low and your shoe plate will disengage the magnet and reconnect on the up stroke. The easiest way to adjust the height of the magnets is to take your shoe and place it on the pedal and have a good look to make sure it is positioned properly. Every shoe is different and you may need some minor adjustment to tune it properly. Once you have it zeroed in you should have no clicking issues. Let me know how it goes.

  9. Richard Williams (verified owner)

    An amazing company, fast, very friendly, very capable, great products. Very very good!!!

  10. Chris Platt (verified owner)

    The magnets don’t actually adjust. I tried for 3 hours to get them to adjust inward before I layered tape under the metal plate to get the correct distance. Besides the magnet the rest of the pedal seems to have high quality.

    • Rick Hopp (store manager)

      Chris, I can fix you up. SOunds like you have a very deep sole inset on your shoes. If you like I can send you extra 2mm spacers that should correct your issue. Let me know.

  11. William Green (verified owner)

    The pedals are nice, minimal packaging, extra pins. However, note these pedals won’t work with a traditional SPD cycling shoe because they have too much ‘rocker’ to engage the few pins. A newer flat-type shoe with the SPD cleats work well.

  12. Stuart M. (verified owner)

    I can exit fast when I need to and I can pedal a full circle. Excellent. I think I left the plate screws a little loose so I could adjust them and then forgot – lost and then found the plate and one of the screws. Put in the longer ones and cranked down on them. I assume this is a one-time problem caused by operator error.

  13. Anonymous (verified owner)

    Got these for my wife as she had no interest in clipping in. She likes the wider platform and feels more secure on the pedals without being clipped in.

  14. Marcos R. Deliz (verified owner)

    Received today and installed on my fat trike. Great ! Worked perfectly for my discapacity related to a CVA.

  15. Lee Savary (verified owner)

  16. Amanda M. (verified owner)

    I love these pedals! I love how easy they are to “lock in”, I love that I don’t have to wear my bike shoes and I love the vibrant colour! Everything was easy to install and I can’t wait to go on longer rides with these pedals!

  17. John W. (verified owner)

    The pedals did not work for me, but they may work for you. The caveat is that I ride a recumbent bike. My recumbent places the legs in a horizontal position. I found that in the horizontal position it is very hard to detach from the Magped pedals. On the recumbent with legs up high it is critical to be able to detach quickly. It is much easier for me to unclip from Frog or SPD clipless pedals. I do not have a conventional upright bike to test the Magped’s on, but I believe it would be much easier to detach from a vertical leg position. From all the videos and reviews on Magped’s upright riders seemed to have no issues with detaching from the pedals. If detaching would have been easy on my recumbent bike I would have gave pedals a 5. They are very nice pedals and very well made, and the ability to raise and lower magnet was a great idea on Magped’s part. Since the magnet can be raised and lowered Magped can use a much thinner and lighter metal piece attached to the shoe than Maglock pedals use.

  18. Rick Hopp (store manager)

    MArk, I just checked the DHL Tracking info and your pedals showed that they were delivered today. Please confirm. Thank you. Rick

Only logged in customers who have purchased this product may leave a review.